 Weldex - 2 Characteristic
Aid used for welding that prevents the adhesion of spatters of the welding metal on the surface. Use
It is applied before welding in the place and in the surroundings of the weld. The preparation is applied on the unfatted surroundings of the welding joint and the welded place by coating or spraying. After 1 – 2 minutes welding is possible. Use water for residual removal. Safety measures
The preparation is irritant. No long time contact with the skin is recommended. In case of skin contact wash with water and treat with protective cream. During welding provide for sufficient ventilation. Packing, storage conditions
Weldex is supplied in 10 and 25 l plastic containers, 200 l metal drums and 0,5 plastic packings with sprayer. Store at a temperature of above freezing point up to 30 °C. Storage time: 12 months after date of production. Degreasing preparation OP/12
Characteristic Universal degreasing, alkaline, foaming concentrate OP / 12 is used in the form of solutions for cleaning and degreasing. It has general use at normal and elevated temperatures - recommended use at temperatures of 40-90 ° C. The recommended concentration for degreasing is 4-8%. It requires rinsing with water as the last operation.
The use
The preparations are used for cleaning and degreasing of metal surfaces after machining, after preservation, before surface treatment and before installation. The degreasing agent OP / 12 can also be used to clean greasy and dirty industrial floors and walls.
Toxicity, safety precautions
All types of these products can be disposed of in a normal demultiplexing station after use. After reducing the content of petroleum substances below 10 mg / l, waste water can be drained, since the surfactants used are well biodegradable.
Packaging, storage
The preparation is packaged in plastic containers - 5,10,25l or 200l metal barrels. The shelf life of products at temperatures between 5 and 40 ° C is 24 months from the date of manufacture.
Passive solution OP / P / 6
Characteristic
Universal water - surfactant degreasing and passivating preparation, which is characterized by moderate foaming. It is used for the degreasing of metal products and also passives the surface layer in the thickness of about 2-4 microns. Thanks to the passivation component, it protects the metal surface against corrosion. This surface is then particularly suitable for subsequent surface treatment by dyeing, epoxy and polyester dyes, or other surface treatments.
The use
In the mechanical and repair industry for degreasing of metal products and their short-term protection against corrosion. The preparation is applied by dipping or spraying. 4% concentration is recommended, higher concentration can be used in case of heavily soiled surface. The working degreasing temperatures are from 20-50 °C, particularly preferred are temperatures of 30-50 ° C.
Toxicity, safety precautions
The product used can be disposed of in a conventional demolition station. After reducing the content of petroleum substances below 10 mg / l, waste water can be drained.
Packaging, storage
The preparation is packaged in plastic containers - 5,10,25l or 200l metal barrels. The shelf life of products at temperatures between 5 and 40 ° C is 24 months from the date of manufacture.
OP / C degreasing agent
Characteristic
OP / C is a degreasing agent based on hydrocarbon solvents that has excellent degreasing properties. At the same time it leaves a clean layer on the cleaned surface, which provides short-term protection against corrosion for 6 to 8 weeks.
The use
OP / C degreasing agent is used to degrease and clean various types of products and components in the engineering industry. The degreasing can be carried out in all degreasing devices designed for this purpose and equipped with a different way of contacting degreasing liquid with the product. The working temperatures for degreasing are in the range of 20 to 50 ° C. Preferably, the composition is used to degrease products where short term corrosion protection needs to be provided prior to further operation and final treatment.
Packing
The preparation is packaged in 25l plastic containers.
Degreasing agent OP VUPOL
Characteristic
A versatile, high-performance, rinse-free detergent for degreasing and cleaning all types of surfaces in the engineering and repair industries. It is characterized by high quenching effect and instantaneous evaporability. Removes oily residues, grease, dust and other impurities. After degreasing, OP VUPOL leaves no residue.
The use
Universal product for all surfaces. It is used wherever it is necessary to degrease and immediately degrease the degreasing agent. The recommended use is to degrease the brake linings, to clean the surface before gluing, sealing, painting and the like in the automotive industry and in general in the engineering industry.
Packing
The preparation is packaged in 25l plastic packaging and 500ml spray package.
|
